One LED color tells you everything: worn vs. not worn, mode, and pause.
Step 1: Power on & auto‑detection
Press and hold power button until white LED turns on, then release.
The device automatically checks if you are wearing it:
| State | LED | What happens |
| Not worn | 🟡 Solid yellow | Device cannot be used. Put on the exosuit. |
| Worn | 🟢 Solid green | Ready. Defaults to Ease Mode. |
If yellow after wearing: Tighten straps and stand up straight. The device needs to feel your body.
Step 2: Adjust intensity (+ / – buttons or APP)
Use the + and – buttons on the control box or the intensity adjustment bar in the app to increase or decrease assistance level.
- Higher level = more power from the exosuit
- Start low, increase gradually as you get comfortable
Step 3: Change modes (two ways)
Option A – Mode button on control box
Press the Mode button to cycle through modes. LED color changes with each press.
Option B – Mobile app
Open the app and select your desired mode. The LED will update to match.
Mode & LED reference
| LED color | Mode | Best for |
| 🟢 Green | Ease Mode | First walks, uphill, reducing fatigue |
| 🔵 Blue | ACC Mode | First walks, uphill, reducing fatigue |
| 🟠 Orange | Train Mode | Daily exercise, leg strength, calorie burn |
Start with Green (Ease Mode) for your first few walks.
Step 4: Pause (yellow LED)
Briefly press the power button (tap, don't hold).
- Device pauses – assistance stops
- LED turns solid yellow
- Press power button again to resume
Yellow means pause. (Same color as "not worn" – that's normal.)
Step 5: Power off
Press and hold power button for 2 seconds until all LEDs turn off.